Flow measurement by orificemeter and venturimeter

Click on simulator tab and log in for working with simulator. The procedure for using simulator is as follows:

 Expt. 1: Static Characteristics of RTD

Aim: Study the change in resistance of RTD probe depending on the process temperature.

Step by step Procedure:

1. Select the material of RTD you want to use.  Temperature coefficient (α) for the same will be displayed on the screen. Note this value.

2. Click on ' R₀' to get the value of R₀ for selected RTD. Note the same.

3. Click on 'Get Temp'. The temperature for which R_t is to be found will be displayed.

4. Using  formula calculate the value of R_t and enter the answer in the box provided (upto 2 decimals with rounding off). Submit the answer using submit button.
   

5. If your calculation is correct, go to step 3. Repeat the procedure min 3 times.

6. If your calculation is wrong, you will be asked to repeat the same. Please refer to GET FORMULA tab and verify your calculations.
   

7. After finishing minimum 3 set of correct readings, you can see the graph by clicking on 'Plot'.

8. When the graph is displayed click Next tab to repeat the procedure with different reference resistance(R₀) value and with  different materials.

9. Minimum 3 calculations are necessary to plot the graph.
   

10. Study the graphs for RTD performance  with different reference resistance values and different materials